Gear Unit

Gear Unit Geared Motor

Max Geared Motor

This geared motor is designed to operate suitably for the operation conditions of various drivers and driven gears.
This is a strong and compact series of reduction gear covering up to the output range of 0.2kW ~ 15kW and the reduction
gear ratio range of 1/5 ~ 1/120.

This is assembled on the basis of the newest wide knowledge and technology information, and as each part such as joints is standardized, the lifetime is semipermanent and this product is economical.

This outstanding product is supplied in a low price as all parts are standardized and produced by the mass production system.

Product Specification
Product Specification
Model
No.
#88 ~ #270
Power 0.2kW ~ 15kW (1/4HP ~ 20HP)
Reduction
gear ratio
1/5 ~ 1/120
Product
type
Horizontal (Horizontal Type)
Vertical (Vertical Type)
Line Power
Main Features
Main Features
  • Many types, wide range of the reduction gear
    ratio
  • General Industrial Power Transmission
  • Long lifetime, high efficiency

Max 2 Geared Motor

As all parts are standardized and made into half-finished goods and so inventory is secured, all required parts are quickly assembled and supplied without new design under any requirements of users.

As such newest precision machines as shaving and grinding were introduced for manufacturing, high trust is kept for high precision and high efficiency.

Goods are compact by handling design material in computer, and have low noise and light weiight and deliver high load due
to special heat treatment and tooth form grinding.

Product Specification
Product Specification
Model
No.
#88 ~ #172
Power 0.2kW ~ 3.7kW (1/4HP ~ 5HP)
Reduction
gear ratio
1/5 ~ 1/200
Product
type
Horizontal(Horizontal Type)
Vertical(Vertical Type)
Line Power
Main Features
Main Features
  • Wide range of Reduction gear ratio up to 1/200 in a single case
  • Can replace the existing GEARED MOTOR : installation size is shared
  • Long lifetime is assured by the previous grease lubrication method
  • Strong geared motor : Optimal case is chosen depending on torque and carburized gear making use of the AGMA safety factor is used

Super Max Geared Motor

Compared to the previous reduction gear, vibration rate is reduced by 30% and noise is reduced by more than 10dB.
As the gear material, SCM420 and SM45C are used, and carburizing, high frequency and heat treatment aew adopted
and polishing is performed to improve precision.

Product Specification
Product Specification
Model No. #165 ~ #520
Power 1.5kW ~ 75kW
Reduction gear ratio 1/5 ~ 1/150
Product type Horizontal(Horizontal Type)
Vertical(Vertical Type)
Line Power
Main Features
Main Features
  • Electric Motor
    High efficiency, F-type motor designed exclusively for energy-saving SUPER-MAX is adopted.
  • Pinion & Gear
    Low noise, high efficiency and long lifetime are realized by applying new design that equalizes the lifetimes of pinion and gear in the independently developed technology.
  • Bearings
    As self-aligning roller bearings and taper roller bearings are adopted, decomposition and assembly of reduction gears can easily be controlled by Adjusting Plate.
  • Lubrication
    New equipment was adopted to use spray lubrication. Compared to ordinary geared motors, oil amount is reduced by 10% and installation inclination angle up to 20。is possible.

Small Geared Motor

As all small sized geared motors are in the modular system, anybody can buy motor and gear head, separately, and assemble simply. This product has been standardized to the most widely required installation size and shape through the long-term accumulated technology and knowhow.

While the strength of body and gear is raised sufficiently, weight and size are minimized by optimal design to accomplish downsizing and light weight.

Product Specification
Product Specification
Model No. K Series, G Series
Power 6W ~ 200W
Reduction gear ratio 1/3 ~ 1/200
Main Features
Main Features
  • Low noise type and large transmission capacity
  • Accurate revolution speed depending on reduction gear ratio
  • High durability within the allowed torque
  • Wide range of reduction gear ratio depending on required speed